Current location:
Home
> News > Product News > Advertising machine
Release date: 2026-10-31
Clicks:0
Before discussing any technical details, one thing needs to be made clear:Conventional wall-mounted advertising machine installationInvolving hardware supply and on-site construction of two links, Qunmao's role is the former. In overseas engineering projects, the most common communication cost encountered by the purchaser is not that the product parameters are not clear, but that the responsibilities between the supplier and the installer are vague and the problems are shirking each other. Put the boundaries forward, both responsible for the customer, but also the key to improve project efficiency.
Some overseas customers need to know before purchasing.Commercial Parameters and Engineering Customization Scheme of Conventional Wall Hanging Advertising Machine, can be combined with the reference of this article.
There are two main types of indoor advertising machine installation: wall-mounted bracket and embedded. There are essential differences between the two in the construction logic, pre-conditions and maintenance methods, and the selection stage must be judged.
The most common indoor installation scheme. The equipment is fixed on the wall rack through the VESA standard interface, and the construction is relatively mature. It is suitable for most retail stores, hotel lobbies, corporate office areas, government halls and other scenarios. The equipment can be removed as a whole during later maintenance, and the maintenance and replacement efficiency is high.
Insert the device into the wall or decorative surface, and the screen surface is flush with the wall surface. Visual integrity is better, suitable for elevator hall, high-end commercial space, brand flagship store and other high aesthetic requirements of the scene. However, the embedded system requires high coordination of civil works in the early stage. It is necessary to confirm the size of the opening, the location of the heat dissipation air duct and the access opening in the decoration design stage. Once the wall is completed, the cost of rebuilding is very high.
| Comparison dimension | Wall-mounted bracket | Embedded |
|---|---|---|
| construction complexity | Medium, standard rack mount | Higher, need to cooperate with civil works |
| Pre-conditions | The wall load can reach the standard | Opening, cooling, and maintenance space must be reserved. |
| Aesthetics | Equipment exposed, clear lines | Flush with the wall, strong overall feeling |
| Cooling method | Natural convection, plenty of space | Special cooling air duct shall be designed |
| Ease of maintenance | Can be removed as a whole, easy to maintain | It is necessary to reserve an access port, and the maintenance space is limited. |
| Applicable scenarios | Retail, office, hotel, government | Elevator lobby, high-end commerce, brand showrooms |
This article focuses onConventional wall-mounted advertising machine installationEmbedded only as a selection reference. The wall-mounted machine adopts the standard VESA mounting interface, and can be equipped with fixed, adjustable angle or rack with front maintenance function. Special attention should be paid to the fact that the VESA hole spacing and the weight of the whole machine must match the rated load of the hanger at the same time-only the hole spacing is not the load bearing, or only the load bearing is not the hole spacing, which is a common hidden danger in the selection stage.
Site survey is the link with the highest input-output ratio in the whole installation process. The survey phase takes an additional two hours, which may avoid two days of rework during site construction. The following inspection items are recommended to be confirmed by the purchaser or integrator before the equipment arrives.
The carrying capacity of different walls on wall-mounted advertising machines varies greatly, and cannot be judged only by "looking strong. Concrete walls and solid brick walls can usually be installed directly, but lightweight structures such as light steel keel gypsum board walls, hollow brick walls, and glass curtain walls require special evaluation of reinforcement plans. The gypsum board wall itself has limited load-bearing capacity, so it is not suitable to directly fix heavy objects. The recommended method is to find the wooden keel or metal keel behind and fix the hanger to the keel position. If the keel position cannot be confirmed, special gypsum board anchor bolts are required, but the load-bearing capacity is still limited. This scheme is not recommended for large-size equipment. For models above 65 inches, it is recommended to use metal expansion bolts for fixing.
Wall hanging advertising machine constructionThe core is not "how to drill", but "what is the inspection standard for each step". The following step overview helps the purchaser and integrator understand the construction process, which is performed by the local certified installation team.
| Wall type | Feasibility judgment | Proposed plan |
|---|---|---|
| Concrete/solid brick wall | Sufficient load-bearing, can be installed directly | Use metal expansion bolts to fix according to the hole position of the hanger |
| Light steel keel gypsum board wall | Not directly load-bearing | Find the keel position and fix it, or install a backboard/reinforcement structure. |
| Hollow brick wall | To be assessed | Use chemical anchor bolts or special hollow wall anchors, if necessary, through the back plate |
| Glass curtain wall/decorative surface | Usually not directly fixed | It is necessary to embed connectors in the structural layer, or use floor support scheme instead. |
Qunmao wall-mounted advertising machine adopts standard VESA installation interface, which can be adapted to mainstream rack products in the market, and can also provide matching rack selection suggestions according to project requirements. When choosing a rack, VESA hole spacing and load bearing are two parameters that must be checked at the same time.
Wiring SpecificationIs easy to be underestimated in the installation of indoor advertising machine. Cable go well, short-term look beautiful, long-term stability and maintenance efficiency. In overseas projects, wiring also involves local electrical regulations and wire standards, which need to be planned in advance.
| Route mode | Applicable scenarios | Precautions |
|---|---|---|
| Buried in the wall | Synchronous construction in decoration stage | Threading pipe protection is required, and the thickness of protective layer of fire circuit pipe shall not be less than 30mm. |
| Metal cable tray | Decorated wall or surface-mounted scene | The trunking shall be firmly fixed, and fire blocking shall be done at the crossing fire compartment. |
| decorative trunking | Commercial space with appearance requirements | Select the trunking close to the wall color to keep the visual neatness |
| Equipment back line management | When the clearance between the hanger and the wall surface is sufficient | Use cable management rack or cable tie to fix, avoid cable squeezing and pulling |
Installation and debugging of indoor advertising machineThe quality of the equipment directly determines the operational efficiency after delivery. The goal of the debugging phase is not only to "be able to start up", but to ensure that the equipment runs stably in the network environment, the CMS system is normally docked, and batch equipment can be managed in a unified way.
| Networking method | Applicable scenarios | Advantages and limitations |
|---|---|---|
| Wired network | Fixed point, high requirements for stability | Stable connection, sufficient bandwidth, pre-wiring required |
| Wi-Fi | Difficult wiring or temporary deployment | Flexible deployment, signal coverage and stability need to be confirmed |
| 4G / 5G module | Outdoor or temporary points without fixed network | Independent networking, considering traffic cost and signal coverage |
Qunmao can provide pre-commissioning and basic parameter pre-configuration services for batch projects. CMS registration and content distribution can be completed after the equipment is connected to the network. For a practical application of the CMS remote management function, referWall-mounted commercial advertising machine selection guide。
Acceptance is the last hurdle of project delivery and the key node of responsibility division. It is recommended to check item by item according to the following dimensions, and record the acceptance results in written form for later traceability.
It is recommended to conduct continuous operation tests for batch projects before acceptance, usually 24-72 hours, to observe equipment fever, crash, black screen, network interruption and other problems. Qunmao advertising machine supports 7 × 24 hours of continuous operation, and has passed the aging test before leaving the factory. On-site aging tests verify the stability of the equipment in the actual installation environment.
Most of the following problems can be avoided through the preliminary survey and confirmation of the selection stage. The purchaser and integrator check item by item before the project starts, which can significantly reduce the probability of on-site rework.
| Frequently Asked Questions | Possible causes | Avoidance advice |
|---|---|---|
| Tilt or loose after installation | Insufficient bearing capacity of wall, mismatch between hanger and equipment, insufficient fixing point | Check wall type, hanger bearing and VESA parameters during survey |
| Gypsum wall can not be directly load-bearing | Limited local load-bearing of lightweight wall | Confirm the keel position, or install backboard/reinforcement structure, and use other schemes for large-size equipment. |
| Equipment heating is obvious | Insufficient cooling space, high ambient temperature, and prolonged operation at high brightness. | Reserved ventilation space, reasonable setting of brightness and timing switch machine |
| The picture signal is unstable | Cable too long, strong and weak current interference, interface loose | Standard wiring, strong and weak current separation, selection of appropriate wire and length |
| Unable to network or manage remotely | Network policy restrictions, IP configuration errors, weak Wi-Fi signals | Confirm network permissions, IP and CMS connections during debugging phase |
| Post-maintenance difficulties | The equipment is too close to the wall, there is no operation space on the side, and there is no access port. | Select front maintenance hanger or reserve sufficient maintenance distance |
The following two cases show the collaboration and delivery process of Qunmao in different types of overseas projects, focusing on the cooperation mode between hardware supply, remote technical guidance and local installation team.
Project Background
The customer is a chain retail brand in Southeast Asia, and advertising machines need to be deployed at the back wall and shelf end of the cashier area of multiple stores for promotional information display and brand image unification. The project requires unified management of multi-store content, headquarters can be updated remotely, and stores can adjust some promotional content locally.
Qunmao Collaboration Mode
Qunmao provides 43-inch and 55-inch wall-mounted advertising machine hardware, and completes system pre-installation and CMS account pre-configuration before leaving the factory. VESA parameters, rack selection suggestions and installation diagrams were provided to the customer, and the local integrator team completed the wall fixing and wiring construction. In the debugging phase, CMS docking and device grouping configuration are completed through remote video guidance.
Project Results
Multi-store equipment access to the same CMS platform, headquarters unified release content, stores can adjust the local promotional information within the scope of authorization. The equipment supports 7 × 24-hour operation and is suitable for all-weather business scenarios of stores.
Project Background
The client is a European hotel group and needs to deploy information release screens in the lobby, conference center corridor and elevator hall for welcome information, meeting scheduling, hotel service guidelines and multi-language announcements. The project has certain requirements for the appearance of the equipment, and it is hoped that the screen will be in harmony with the interior decoration style.
Qunmao Collaboration Mode
Qunmao offers a 55-inch wall-mounted advertising machine with a customized narrow bezel appearance to match the hotel's decoration style. Provide multilingual CMS operation data and content partition suggestions for multilingual content requirements. The European voltage is 220-240V, and the equipment supports wide voltage input to adapt to the local power grid. The wall hanging construction of the lobby and corridor points is completed by the local installation team. Qunmao provides the load-bearing parameters and installation schematic diagram of the hanger as a reference for construction.
Project Results
After the equipment is deployed, it is connected to the hotel content management system and different content is pushed by region and time period. Meeting scheduling and floor guidance were updated in real time, and the number of front desk inquiries decreased. The technical information provided by Qunmao in both Chinese and English reduces the cost of understanding for the local team.
For more information on how Qunmao advertising machines land in more indoor commercial scenarios, seeFive types of indoor commercial landing solutions。
The key to the installation of conventional wall-mounted advertising machines lies in the preliminary survey, the matching of the hanger and the wall, the standardized wiring, the complete debugging and the clear acceptance. If you are planning an indoor advertising machine project, please contact Qunmao to obtain product specifications, installation size drawings and batch project quotations.
Service Hotline:+86 13714317162
Partner Links:
en
中文 
Previous:
Return to list
